Three-Way Totally Invisible In-Wall or Ceiling Loudspeaker (Pair)

The Stealth Acoustics model AX3 is a three-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame which attaches directly to standard structural framing without the need for special mounting brackets. The paintable active diaphragm face is a structurally modified three layer composite consisting of two layers of graphics grade paper with a foam core. The diaphragm is bonded to the frame, creating an active area surrounded by a stable mounting area. Basic installation instructions are shown on our removable cover sheet that comes off before taping and finishing begins.

The face of the panel has been pre-primed and is ready to receive finishing materials. The edges of the panel are tapered similar to the edges of gypsum wallboard, providing the room necessary for normal wallboard tape and joint compound to be used to feather the speaker seamlessly into the wall or ceiling. The AX3 loudspeaker comes equipped to match either 1/2” or 5/8” wallboard installations. On-site finishing options include latex paint, covering with light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials.

Stealth Acoustics speaker invisibility allows for powerful advantages over other loudspeakers as they can be placed wherever they sound best, free of visual concerns that may conflict with architectural features. Stealth Acoustics offers complete, invisible companion subwoofer solutions for extended low frequency response.

Frequency Response 40Hz to 20kHz -4db

Power Capacity 150 Watts RMS
Protection 3 Independent self-resetting devices.(LF, MF and HF)
Sensitivity 85db 1 W /1 Meter.

Driver Components
High Frequency: 25mm Neodymium Motor
Mid Frequency: 25mm Neodymium Motor (2)
Low-Frequency: 1-1/2” Voice Coil, 8” Woofer,
Ceramic 20oz Magnet

Rated System Impedance 4 ohms
Polar Dispersion 170 degrees Vertical and Horizontal

Dimensions
15-7/8” (403mm) Wide
30” (762mm) High
3-1/4” (82.55mm) Deep

Finish Pre-primed, graphic arts grade paper
Product Weight 19 Lbs. (8.8 kg) per speaker
Shipping Weight 42 Lbs. (18 kg) per pair

Included Accessories
1/8” shims for 5/8” drywall installations
Mounting Screws